Span Port

[sureshmv]

In one of my location using catalyst2900 eriesXl switch with IOS ver 11.2.I want to make one port as span for the other port where i connect my firewall for the process of monitering the triffic.Can I do the span port on this switch if so what is the command.

[rmcarthur]

Hi, this link should cover it. Not sure which release it was introduced so you may have to upgrade from 11.2.

http://www.cisco.com/en/US/products/hw/switches/ps637/products_configuration_guide_chapter09186a008007e838.html#xtocid22

hth

[alagrawa]

Hi,

The port monitor command was introduced in 11.2(8)SA.

http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc4/cref/clicmds.htm#xtocid53

regards

-Alok