ā08-07-2012 06:36 PM - edited ā03-07-2019 08:12 AM
I have a pair of 3750E-24PD-S stacked together, it seems after stacked together the stacked switch always flood the console screen with these messages which are not true:
*Mar 1 00:16:15.427: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
*Mar 1 00:16:36.197: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed (Switch-2)
*Mar 1 00:16:42.472: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
*Mar 1 00:17:09.517: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
*Mar 1 00:18:45.348: %PLATFORM_ENV-1-RPS_PS_SIGNAL_FAULTY: 12V signal on RPS power supply A is faulty (Switch-2)
*Mar 1 00:22:55.001: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
Switch-2 is the stack member, Switch-1 is the stack master. The RPS fan failed refers to RPS2300 or the internal power supply of 3750E? Even when I turned on the RPS2300 the stacked switch still display the messages. Also I have two RPS2300 serving stack master and stack member respectively both RPS2300 were switched off why the messages only refer to Switch-2 and not Switch-1? hmm...Hope some of you can help to clarify thanks
Additional output - stack information
Switch>sh switch
Switch/Stack Mac Address : 2c36.f8e6.4b00
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master 2c36.f8e6.4b00 10 1 Ready
2 Member a418.753a.8f80 1 1 Ready
Switch environmental information
Switch>sh env all
FAN is OK
TEMPERATURE is OK
Temperature Value: 35 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 49 Degree Celsius
Red Threshold : 59 Degree Celsius
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1 C3K-PWR-750WAC AZS154302LD OK Good Good 300/420
2 C3K-PWR-750WAC DTN1551E0J3 OK Good Good 300/420
SW Status RPS Name RPS Serial# RPS Port#
-- ------------- ---------------- ----------- ---------
1 Overcurrent CiscoRPS FDO1620YH42 1
2 Overcurrent CiscoRPS FDO1620YH7X 1
RPS Name: CiscoRPS
State: Overcurrent
PID: PWR-RPS2300
Serial#: FDO1620YH42
Fan: Faulty
Temperature: Green
RPS Power Supply A: Present
PID : C3K-PWR-750WAC
Serial# : DTN1604E03A
System Power : Bad
PoE Power : Bad
Watts : 300/420 (System/PoE)
RPS Power Supply B: Not Present
DCOut State Connected Priority BackingUp WillBackup Portname SW#
----- ------- --------- -------- --------- ---------- --------------- ---
1 Standby Yes 6 No No Switch 1
2 Standby No 6 No No <> -
3 Standby No 6 No No <> -
4 Standby No 6 No No <> -
5 Standby No 6 No No <> -
6 Standby No 6 No No <> -
RPS Name: CiscoRPS
State: Overcurrent
PID: PWR-RPS2300
Serial#: FDO1620YH7X
Fan: Faulty
Temperature: Green
RPS Power Supply A: Present
PID : C3K-PWR-750WAC
Serial# : DTN1551E05H
System Power : Bad
PoE Power : Bad
Watts : 300/420 (System/PoE)
RPS Power Supply B: Not Present
DCOut State Connected Priority BackingUp WillBackup Portname SW#
----- ------- --------- -------- --------- ---------- --------------- ---
1 Standby Yes 6 No No Switch 2
2 Standby No 6 No No <> -
3 Standby No 6 No No <> -
4 Standby No 6 No No <> -
5 Standby No 6 No No <> -
6 Standby No 6 No No <> -
Switch>
ā08-07-2012 06:55 PM
There are some threads in this forum which has these descriptions and may have been caused by a bug in the IOS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide