cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
297
Views
0
Helpful
2
Replies
Beginner

Stack ports down after adding switch to the stack

Hi There,

 

I am having trouble with a couple of stack port being down after I added a 6th switch to a stack of 2960x switches. It is port 1 on switch 1 and port 2 on switch 6.

I provisioned the switch on the stack first and also set the switch number and priority on the switch before adding to the stack.

Onyl thing I can see is being the issue is a faulty stack port on the new switch as the cable from switch 1 to 6 was just moved from the old last switch to the new switch 6.

 

This is what the showed once I added the switch.

275251: Jan 11 06:57:15.196 NZDT: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack
275252: 000733: Jan 11 06:57:15.133 NZDT: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (PMR1-FL4-L2-SW1-4)
275253: 000783: Jan 11 06:57:15.147 NZDT: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (PMR1-FL4-L2-SW1-5)
275254: 000443: Jan 11 06:57:15.174 NZDT: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (PMR1-FL4-L2-SW1-3)
275255: 000638: Jan 11 06:57:15.192 NZDT: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (PMR1-FL4-L2-SW1-2)
275257: Jan 11 06:57:35.595 NZDT: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 6 has changed to state UP
275258: Jan 11 06:57:35.595 NZDT: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 6 has changed to state DOWN
275269: 000030: Jan 11 06:57:43.582 NZDT: %CFGMGR-4-SLAVE_WRITING_STARTUP_CFG: only master can do that (PMR1-FL4-L2-SW1-6)
275270: 000031: Jan 11 06:57:43.582 NZDT: %CFGMGR-4-SLAVE_WRITING_STARTUP_CFG: only master can do that (PMR1-FL4-L2-SW1-6)

 

Appreciate it and tanks in advance.

Everyone's tags (3)
2 REPLIES 2
Beginner

Re: Stack ports down after adding switch to the stack

Resovled.

Turns out even though I repurposed the cable it some how became faulty as I tried another one and stack port came up ok.

Highlighted

Re: Stack ports down after adding switch to the stack

Good to hear...
P.Williams
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards