06-14-2022 06:11 AM
Can I stack C9300-24UX and C9300-24P together?
I think it should be possible.
I found Cisco documentation which is saying that you can not Stack C9300 and C9300-24UXB.
But I think C9300-24UXB is different to C9300-24UX?
Does anybody know exactly if I can stack C9300-24UX and C9300-24P?
Thanks.
06-14-2022 06:20 AM
UXB will only stack with UXB.
06-14-2022 06:35 AM
Hi,
Sorry - Leo is correct.
CCO is confusing at times
The data sheet says something different re the stacking
https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html
"Catalyst 9300 higher scale SKUs (C9300-24UB, C9300-24UXB, C9300-48UB) need to be stacked with other higher scale models."
06-14-2022 06:21 AM
Hi,
Yes you can stack these together.
They are both 480G stackwise ready.
Please read this book/chapter
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/hardware/install/b_c9300_hig/m_9300_installing_the_switch.html#concept_29A3FEEE54C847BC8B792C453F7FA612
06-14-2022 06:29 AM
Mixed stacking between Catalyst 9300 and Catalyst 9300X and Catalyst 9300 higher scale models (C9300-24UB, C9300-24UXB, C9300-48UB) is not supported.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide