About Chris.Mes

Chris.Mes · 12-22-2022

We have two C9115AXI on remote site, with central WLC C9800. These two C9115AXI are connected to switch C9200 (PoE). No other PoE devices on the switch.They worked fine for a few month, but now we have strange issue, clients on one of the APs can aut...

Chris.Mes · 07-29-2022

Having this issue not on the Radius Server Sequence Page, but on the "External Radius servers" Page.ISE 2.7.0.356 patch 7Even if adding a new Radius server, die page is empty, but I can see and choose this server under "Radius Server Sequence".

Chris.Mes · 07-29-2022

We've installed new ISE 2.7.0.356 patch 7 on Hyper-V.The backups are from old hardware ISE installed from external support (professionell).But now we do not see external radius servers ("no data available"), even if we add a new one.But we can see an...

Chris.Mes · 07-06-2022

Hello,I'd like to have Cisco Nexus N5K-C5672UP with Radius-Authentication (ISE) and for some users LOCAL Authentication.We've this solution on different Catalysts, but it seems it does not really work on the Nexus.I just can have Radius OR local auth...

Chris.Mes · 06-14-2022

Can I stack C9300-24UX and C9300-24P together?I think it should be possible.I found Cisco documentation which is saying that you can not Stack C9300 and C9300-24UXB.But I think C9300-24UXB is different to C9300-24UX?Does anybody know exactly if I can...

Chris.Mes · 12-22-2022

Hello!I think the problem was "Mobility Express", because I also saw additional MAC-address 0000.5e00.0101 on the switch and I saw it in the leases of DHCP. Since I've entered command "ap-type capwap" on the APs they work like expected.

Chris.Mes · 06-09-2022

When changing the orderauthentication order mab dot1xthe client keeps connected to network.It seems when it does dot1x, it tries dot1x 3 times and then waits another 75-80 seconds until it is connected again.So the client is down for approx. 90 secon...

Chris.Mes · 06-09-2022

This is the interface config:!interface GigabitEthernet0/19switchport access vlan 111switchport mode accessswitchport voice vlan 244authentication host-mode multi-domainauthentication order dot1x mabauthentication port-control automabmls qos trust ds...

Re: Cisco ISE Authorization Profile? · 04-29-2022

Thanks, now I've found it. Under PolicySets there was an old rule for exactly this MAC-address which results to profile "VLAN199-UNTRUST".

Member Since	‎03-04-2021 03:21 AM
Date Last Visited	‎01-09-2023 10:29 AM
Posts	14

User Statistics

User Activity

C9115AXI client problems

CSCvv67051 - ISE 2.7: "no data available"

Cisco ISE 2.7.0.356 patch 7 not showing external radius servers

N5K-C5672UP Radius & Local Authentication possible?

Stacking C9300-24UX and C9300-24P?

Re: C9115AXI client problems

Re: dot1x client authentication every 10 minutes?

Re: dot1x client authentication every 10 minutes?

Re: Cisco ISE Authorization Profile?