Can this 2 switch be stacked and if not, is there any changes we have to do to make it stack?
The switch we need to add:
IOS - "flash:/c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin"
Switch name - missionkansas17-swt
Model - WS-C2960X-24PD-L
IOS - "flash:/c2960x-universalk9-mz.150-2.EX3.bin"
Solved! Go to Solution.
I see this link and it mentions 2960s but not 2960. Since its same stackwise, I would imagine it works but one is running lanbase and one is universal so I don't know if it will work?
Cisco(r) Catalyst(r) 2960-X Series Switches are the next generation of the world's most widely deployed access switches. They enable intelligent services such as application visibility, Smart Operations, Layer 3 routing and deliver best-in-class energy efficiency with up to 80 percent energy savings. Designed for operational simplicity to lower TCO, this platform also offers investment protection with mixed stacking with existing Cisco Catalyst 2960-S and 2960-SF switches.
I don't see any support between C2960 and C2960X but C2960X works with 2960-S and 2960-F. I haven't found any confirmation that 2960x works with 2960 and if you run into it, please do let me know. Thanks