Hi Everyone,
I have a question on Stackwise-Virtual configuration on 2 Cisco 9500 switches.
Scenario:
- 2 9500 switches with port 46, 47 configured for Stackwise, both are using 25G SFP modules, port 48 also used 25G SFP module and configured for: "virtual dual-active-detection"
I would like to increase the throughput of the Stackwise with 40G SFP modules, can I keep the port 48 with 25G SFP without having to increase to 40G SFP?
Thank you all in advance,
Byme88