StackWise with different C9200L switch models

[MichaelBalzer77353]

Hello,

I would like to be double check to be on the safe side but is it possible to have different C9200L switch models inside the same StackWise cluster?

I currently have a StackWise cluster of six C9200L-48T-4G switches and would like to add a C9200L-48PXG-4X-E to this very same cluster...

Regards

[Leo Laohoo]

1. 9200L will stack with different model of 9200L
2. 9200L will NOT stack with 9200 (and vice versa)
3. All switch members must be loaded with Install or Bundle Mode (not both). 
4. Same IOS-XE version

[balaji.bandi]

Look at the stacking : ( you can not mix some models with others)

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.html

[inderdeeps]

@MichaelBalzer77353 : Answer to your query is Yes, You can stack C9200L-48T-4G with C9200L-48PXG-4X-E as both are belongs to same C9200L family. Go ahead !

[MichaelBalzer77353]

Thank you very much for your helpful answer.

[inderdeeps]

@MichaelBalzer77353 : Good Luck bro, If you got the answer , Please close the thread with the accepted solution !

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)