Trying to determine when I perform show standby the following appears:
GigabitEthernet0/1 - Group 2
State is Active
264 state changes, last state change 00:47:43
Virtual IP address is 10.2.5.1
Active virtual MAC address is 0000.0c07.ac02
Local virtual MAC address is 0000.0c07.ac02 (v1 default)
Hello time 1 sec, hold time 2 sec
Next hello sent in 0.412 secs
Preemption enabled, delay min 120 secs, sync 20 secs
Active router is local
Standby router is ICMP: , priority 110 (expires in 1.004 sec)
Priority 120 (configured 120)
