02-29-2016 09:53 PM - edited 03-08-2019 04:46 AM
Please can someone tell me meaning of each line.
Port 257 (GigabitEthernet3/1) of VLAN0102 is designated forwarding
Port path cost 4, Port priority 128, Port Identifier 128.257.
Designated root has priority 4198, address d0c7.89a9.c940
Designated bridge has priority 4198, address d0c7.89a9.c940
Designated port id is 128.257, designated path cost 0
Timers: message age 0, forward delay 0, hold 0
Number of transitions to forwarding state: 1
Link type is point-to-point by default
BPDU: sent 427353, received 3
03-22-2016 02:47 AM
you mean if i create two vlan on 3850 Layer 3 switch ok.
vlan 10
vlan 20
here i will assign ip to one vlan
int vlan 10
1.1.1.1 255.255.255.0
but not for vlan 20.
vlan 20 is a l2 vlan and vlan 10 is a l3 vlan , am i right,
03-22-2016 02:49 AM
if you don't assign an ip to vlan 20 , it will need to route out somewhere else then at layer 3 for that subnet , every layer 2 vlan needs a layer 3 gatew3ay either an SVI or a sub interface if its a router on a stick design
03-22-2016 02:57 AM
i just type the command on my core swith
sh vlan
i can see here
vlan 1 default
vlan 100 192.168.100.1
vlan 200 192.168.200.1
vlan 300 192.168.300.1
vlan 400 192.168.400.1
vlan 404 192.168.404.1
vlan 500 192.168.500.1
here where is the Layer 2 vlan how can we know here on my core switch
03-23-2016 02:15 AM
Hello
are u there,
please can you tell me what is the meaning of this line
RADIUS server 192.168.68.1:1812 failed to respond to request (ID 224) for client 00:10:40:83:56:M8 / user 'mxq23000'
03-24-2016 08:31 PM
hello Mark,
good morning,
how are you ,
are u busy or on holiday...
03-25-2016 01:30 AM
Hey whats up
03-25-2016 01:33 AM
nothing special just sit in the office how about you.
03-29-2016 11:01 PM
Hello Mark,
good morning,
how are you ,
where you are, in office or on holiday , actually i did not get any reply.
03-31-2016 10:13 PM
hello
good morning,
how are you ......
04-01-2016 01:17 AM
Hi if you have a technical question please open it in a new post
04-01-2016 02:14 AM
Hello Mark
i just posted new question in new post. with subject line
03-16-2016 03:16 AM
but here it is not mention which one i reload the SUP card because i have two SUP Card, please can you help me.
Mar 16 05:29:48.899: %C4K_HWFLOWMAN-3-NFEINTERRUPTSTATUS: (Suppressed 6999 times)module: fl InterruptStatus: 0x8
Mar 16 05:29:48.899: %C4K_HWFLOWMAN-4-NFEFLINTERRUPT: (Suppressed 111999 times)NFE FL ipv6AddrCompTblMemCorrectedEccErr interrupt. rep[0]: 0x40E000000, rep[1]: 0x0, rep[2]: 0x0, valid: false, multipleErrorsDetected: true, addr: 0xE, ecc: 0x0
03-10-2016 02:10 AM
I don't understand that , how can you have 2 gateways showing same pc output , can you post it ?
check the doc I posted if your running device tracking there is solutions in it for 0.0.0.0 addresses
03-10-2016 02:19 AM
03-10-2016 02:25 AM
any static configuration on the pc or is it all dhcp
is bonjour running on that vlan ?
https://social.technet.microsoft.com/Forums/windows/en-US/765aa1c6-dd9a-4447-9de0-aecc41498b04/windows-7-two-default-gateway-0000?forum=w7itpronetworking
any logs to say there is an issue on directly connected Cisco switch
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide