12-07-2010 12:36 PM - edited 03-06-2019 02:23 PM
We have a 4510r-E core, been up and running for 2 years. We also utilized about a dozen linksys and cisco 5 port workgroup hubs/switches. Saturday night every one of the hubs/switches stopped working and would not allow traffic through them. I've seen were the 1 occasional switch quit working however never all at the same time. They were all spread out among our property so i know it wasn't a power spike, and several were connected to some 3560's we have in different closests around our property. Brand new hubs do not work either.
Anyone have any insight on what may be blocking these? As far as i can tell there was no changes made, according to access logs no one accessed the switches.
12-07-2010 07:42 PM
Hi Jason,
Can you provide the output of a show interface status command pls?
Rgds
Scott
12-09-2010 07:15 AM
Sorry took so long, here is the show interface status:
sh interface sa tatus
Port Name Status Vlan Duplex Speed Type
Gi1/1 connected trunk full 1000 1000BaseSX
Gi1/2 connected trunk full 1000 1000BaseSX
Gi1/3 connected trunk full 1000 1000BaseSX
Gi1/4 connected trunk full 1000 1000BaseSX
Gi1/5 connected trunk full 1000 1000BaseSX
Gi1/6 connected trunk full 1000 1000BaseSX
Fa2/1 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/2 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/3 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/4 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
Fa2/5 REGULAR USER CONNE connected 8 a-half a-10 10/100BaseTX
Fa2/6 REGULAR USER CONNE connected 8 a-half a-10 10/100BaseTX
Fa2/7 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
Fa2/8 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/9 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/10 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/11 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
Fa2/12 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/13 REGULAR USER CONNE notconnect 15 half auto 10/100BaseTX
Fa2/14 REGULAR USER CONNE notconnect 15 half auto 10/100BaseTX
Fa2/15 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa2/16 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
Fa2/17 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
Fa2/18 REGULAR USER CONNE notconnect 28 half auto 10/100BaseTX
Fa2/19 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/20 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/21 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/22 REGULAR USER CONNE connected 8 a-full a-100 10/100BaseTX
Fa2/23 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
Fa2/24 REGULAR USER CONNE notconnect 8 half auto 10/100BaseTX
Fa2/25 REGULAR USER CONNE connected 27 a-full a-100 10/100BaseTX
Fa2/26 REGULAR USER CONNE connected 1 a-half a-10 10/100BaseTX
Fa2/27 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/28 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/29 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/30 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/31 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/32 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/33 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa2/34 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa2/35 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/36 REGULAR USER CONNE connected 27 a-full a-100 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa2/37 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/38 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/39 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa2/40 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/41 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa2/42 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa2/43 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/44 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/45 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/46 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/47 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/48 REGULAR USER CONNE connected 15 a-full a-100 10/100BaseTX
Gi3/1 connected trunk full 1000 1000BaseSX
Gi3/2 connected trunk full 1000 1000BaseSX
Gi3/3 connected trunk full 1000 1000BaseSX
Gi3/4 notconnect 1 full 1000 No Gbic
Gi3/5 connected trunk full 1000 1000BaseSX
Gi3/6 connected trunk full 1000 1000BaseSX
Fa4/1 REGULAR USER CONNE connected 10 a-half a-10 10/100BaseTX
Fa4/2 REGULAR USER CONNE connected 11 a-full a-100 10/100BaseTX
Fa4/3 REGULAR USER CONNE notconnect 11 half auto 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa4/4 REGULAR USER CONNE notconnect 11 half auto 10/100BaseTX
Fa4/5 REGULAR USER CONNE connected 12 a-full a-100 10/100BaseTX
Fa4/6 REGULAR USER CONNE connected 12 a-full a-100 10/100BaseTX
Fa4/7 REGULAR USER CONNE notconnect 15 half auto 10/100BaseTX
Fa4/8 REGULAR USER CONNE connected 13 a-full a-100 10/100BaseTX
Fa4/9 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/10 REGULAR USER CONNE connected 10 a-full a-100 10/100BaseTX
Fa4/11 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/12 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/13 REGULAR USER CONNE connected 2 a-full a-100 10/100BaseTX
Fa4/14 REGULAR USER CONNE connected 4 a-half a-100 10/100BaseTX
Fa4/15 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/16 REGULAR USER CONNE connected 15 a-full a-100 10/100BaseTX
Fa4/17 REGULAR USER CONNE connected 5 a-full a-100 10/100BaseTX
Fa4/18 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/19 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/20 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/21 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/22 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/23 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/24 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa4/25 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa4/26 REGULAR USER CONNE connected trunk a-half a-100 10/100BaseTX
Fa4/27 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/28 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/29 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/30 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/31 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa4/32 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/33 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/34 REGULAR USER CONNE connected trunk a-half a-10 10/100BaseTX
Fa4/35 REGULAR USER CONNE connected trunk a-half a-10 10/100BaseTX
Fa4/36 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa4/37 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/38 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/39 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/40 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/41 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/42 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/43 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/44 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/45 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa4/46 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/47 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa4/48 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Te5/1 TEN GIG INTERFACE connected trunk full 10G 10GBase-SR
Te5/2 TEN GIG INTERFACE inactive 1 full 10G No X2
Gi5/3 connected trunk full 1000 1000BaseSX
Gi5/4 connected trunk full 1000 1000BaseSX
Gi5/5 inactive 1 full 1000 No Gbic
Gi5/6 inactive 1 full 1000 No Gbic
Te6/1 TEN GIG INTERFACE connected trunk full 10G 10GBase-SR
Te6/2 TEN GIG INTERFACE inactive 1 full 10G 10GBase-SR
Gi6/3 notconnect 1 full 1000 No Gbic
Gi6/4 notconnect 1 full 1000 No Gbic
Gi6/5 inactive 1 full 1000 No Gbic
Gi6/6 inactive 1 full 1000 No Gbic
Fa7/1 REGULAR USER CONNE connected 2 a-half a-10 10/100BaseTX
Fa7/2 REGULAR USER CONNE connected 2 a-half a-10 10/100BaseTX
Fa7/3 REGULAR USER CONNE connected 2 a-half a-10 10/100BaseTX
Fa7/4 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/5 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/6 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa7/7 REGULAR USER CONNE connected 2 a-full a-100 10/100BaseTX
Fa7/8 REGULAR USER CONNE connected 6 a-full a-100 10/100BaseTX
Fa7/9 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/10 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/11 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/12 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/13 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/14 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/15 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/16 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/17 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/18 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/19 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/20 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa7/21 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/22 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/23 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/24 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/25 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa7/26 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/27 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa7/28 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/29 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa7/30 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/31 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/32 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/33 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/34 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/35 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/36 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/37 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/38 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/39 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/40 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/41 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/42 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa7/43 REGULAR USER CONNE connected 11 a-full a-100 10/100BaseTX
Fa7/44 REGULAR USER CONNE notconnect 11 half auto 10/100BaseTX
Fa7/45 REGULAR USER CONNE notconnect 11 half auto 10/100BaseTX
Fa7/46 REGULAR USER CONNE notconnect 11 half auto 10/100BaseTX
Fa7/47 REGULAR USER CONNE notconnect 11 half auto 10/100BaseTX
Fa7/48 REGULAR USER CONNE notconnect 11 half auto 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa9/1 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/2 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/3 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/4 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/5 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/6 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/7 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/8 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/9 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/10 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/11 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/12 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/13 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/14 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/15 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/16 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/17 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/18 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/19 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/20 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/21 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa9/22 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/23 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/24 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/25 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/26 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/27 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/28 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/29 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/30 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/31 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/32 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/33 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/34 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/35 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/36 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/37 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/38 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/39 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/40 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/41 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/42 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
--More--
Port Name Status Vlan Duplex Speed Type
Fa9/43 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/44 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/45 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/46 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
Fa9/47 REGULAR USER CONNE notconnect 1 full auto 10/100BaseTX
Fa9/48 REGULAR USER CONNE connected trunk full a-100 10/100BaseTX
12-09-2010 07:26 AM
Could you also please tell us on which ports the non-working switches are attached?
12-09-2010 07:31 AM
Currently they are not on any ports as i had to remove them. I'll hook one up, verify it is
still not working and repost in a few minutes.
12-09-2010 07:50 AM
I have a 5 port linkys plugged into 2/41 with a computer on it. The computer cannot access anything on the network
when on the switch:
Fa2/37 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/38 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/39 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa2/40 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/41 REGULAR USER CONNE connected trunk a-full a-100 10/100BaseTX
Fa2/42 REGULAR USER CONNE notconnect 1 half auto 10/100BaseTX
Fa2/43 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/44 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/45 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/46 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/47 REGULAR USER CONNE connected 1 a-full a-100 10/100BaseTX
Fa2/48 REGULAR USER CONNE connected 15 a-full a-100 10/100BaseTX
12-09-2010 10:35 AM
Is the link between core and wg-switch supposed to operate in trunking mode?
When used as a port extension, you would probably rather want to extend a single vlan.
Although it does not explain the sudden halting of all ports, I would expect such a config to run typically in non-trunking mode.
Can you test what happens when you set the switch port in access mode? (switchport mode access)
regards,
Leo
12-09-2010 02:00 PM
Also if the switch is configured as a hardcoded trunk , "switchport mode trunk " , it can say its trunking when it may not be . One of the gotchas of forcing on trunks. In order to say trunk all it needs is a physical link and it will say trunk when in fact it may not be working at all . Check the device on the other end of this if its not working on the config . Also if you have not pruned off vlans not needed on the trunks (just allowing everything everywhere) then a single switch or user could indeed effect the rest of the lans . All it takes is for someone to bridge a couple of ports together by mistake and you will be amazed how fast things can go down. That is a lot of trunks. Any indications in the logg of what went on ? Are the logs sent to a server where you could look at the that time period ?
12-09-2010 02:12 PM
Cisco has this annoying little protocol called DTP (Dynamic trunking protocol).
If your work group switch is just a bridge for a single VLAN then DTP will be a problem for you. If you are merely trying to bridge a VLAN and not exactly trunk or tag multiple VLANs to this work group switch then you will need to disable DTP on the Fa2/41 port.
With DTP enabled, the protocol listens for BPDUs. If it receives them it assumes the connection is another switch and that switch wants to trunk.
If you are not trying to forward multiple VLANs over to this switch then configure the Fa2/41 port with the following command.
switchport mode access
switchport nonegotiate
This sets the port to an access port and then turns off DTP.
If you are trying to trunk multiple VLANs then I will need to see the full configurations on both ends.
12-09-2010 02:51 PM
Thanks!
Setting the port to:
switchport mode access
switchport nonegotiate
Fixed the issue, any idea why after 2 years, longer on some other that this all of a sudden happened for every linksys switch we have?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide