10-01-2015 01:25 PM - edited 03-08-2019 02:01 AM
I'm configuring some Nexus 9372PXs running 6.1(2)I3(2). The 6.X configuration guide clearly states that I can create L3 sub-interfaces using the range 1-4094. However, when I attempt to do so, I appear to be getting a limit of 1-511. What am I missing here?
n9372px(config-if)# int eth1/7.?
<1-511> Sub-Interface number (<1-63> for SI on satellite port)
04-01-2019 01:53 PM
Hello @TIMOTHY SCHWIMER
It looks like this is related with a software bug (CSCux11016) that is hitting to the version 7.0.3 and it's possible that was not detected on release 6.1. If you need subinterfaces greater than 511, as workaround Cisco recommends to create a port-channel, so you may bind the physical interface to it and create subinterfaces under de port-channel. You may create port-channels with one single link.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux11016
HTH
Marcelo
08-12-2021 01:16 AM
I got the same issue running nxos.7.0.3.I5.2.bin, upgraded to nxos.7.0.3.I7.9.bin.
Still the same issue.
Port-channel is working fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide