02-26-2020 05:27 AM
I was going through subnetting. I turn into a doubt.
As per books and tutors.
ClassA can have mask from /8 to /32 and have variable subnets and same for next two classes
Class B can have from /16 to /32
Class C can have from /24 to /32
My question is , Can a class C network have /9 or /14 mask, if yes then how many number of subnets for it ?
Solved! Go to Solution.
02-26-2020 08:22 AM
Hi,
Yes you can do that, having a /9, or /6 or a /4 for a class A, or class B, or class C address. This is called supernetting or CIDR (classless inter domain routing). The number of available subnets follows the same logic as in subnetting, cause in the end from a /4 you may need multiple /8 subnets. So number of available subnets, is based on how many bits you borrow for subnetting, while the remaining bits give you the number of hosts/IP's available within each subnet.
Regards,
Cristian Matei.
02-26-2020 08:22 AM
Hi,
Yes you can do that, having a /9, or /6 or a /4 for a class A, or class B, or class C address. This is called supernetting or CIDR (classless inter domain routing). The number of available subnets follows the same logic as in subnetting, cause in the end from a /4 you may need multiple /8 subnets. So number of available subnets, is based on how many bits you borrow for subnetting, while the remaining bits give you the number of hosts/IP's available within each subnet.
Regards,
Cristian Matei.
02-26-2020 08:40 AM
02-26-2020 10:02 AM
02-26-2020 08:52 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide