switch 9200 to controller cisco

[Dhikra Marghli]

Hello

I have switch SMC connect with controller Cisco in port 34 :

interface ethernet 1/34

switchport allowed vlan add 1 untagged

switchport native vlan 1

switchport mode trunk

switchport allowed vlan add 1,7 tagged

VLAN 1 : Vlan managment //// VLAN 7 vlan Data ( for user wif )

So  i want the controller  cisco  conncted to switch 9200 l in port interface gigabitEthernet 1/0/43   that allow enbaled wifi !

so   configuration  on switch 9200

interface GigabitEthernet1/0/43
switchport trunk allowed vlan 1,7
switchport mode trunk

so  i can't ping from switch 9200 to wlc 172.16.0.210 and wifi don't work !!

i need what's configuration correct in switch 9200l that allw wifi work !!

i wait a reply from expert switch 9000 that help me 

thanks in advance

[Dhikra Marghli]

I put this configuration  in switch 9200 connected to WLC cisco  

interface GigabitEthernet1/0/43
switchport trunk native vlan 7
switchport trunk allowed vlan 1,7
switchport mode trunk

All AP and User take ip address But i have not Internet from WIFI and WLC can ping 8.8.8.8  and switch can ping 172.16.0.210 

so i need a help that alllow all user have Internet and if the configuration in switch 9200 is correct or not !!! 

thanks in adva

[Dhikra Marghli]

I need a reply that why i have not internet if i put this configuration in Switch 9200 connected to wlc cisco ???

---

Can i give any check about any hard ??