SWITCH CISCO CATALYST 2960 PLUS, L2 or L3?

[pdenableetoavit19698]

Hi guys,

is this switch a L2 or L3 (with some L3 functionalities)?

possible to setup vlans on it?

thank you

[balaji.bandi]

it can act both depending on the config / IOS / License you have .

you can find more configuration guides here :

https://www.cisco.com/c/en/us/support/switches/catalyst-2960-series-switches/series.html#Configuration

[Leo Laohoo]

2960 is a layer 2 only switch with very limited static routing capabilities.