04-03-2020 10:20 AM
Hello guys.
I've managed to connect through internet via PPoe on my Cisco 1841 Router, I can ping my Cisco 2950 switch and vice versa and my switch can ping 8.8.8.8 with success, but I can't seem to find why my PC doesn't connect to the internet when I connect it through my switch.
I've tried to connect my PC with the router through the LAN ports of my router and it doesn't work as well. My PC is on DHCP auto, also I've tried giving it IPs manually with no success. ( + also tried release and renew / hardware reset to switch )
Here are my configs for both router and switch:
Switch:
Building configuration... Current configuration : 1676 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname main_SW ! enable secret 5 $1$QOT9$e4GDg/0/WshTnxrhTdYfh/ ! username beleaua secret 5 $1$P5Ln$BPbPwvzMwkyIG9uIEwq8P. ip subnet-zero ! ip domain-name cisco.com ip ssh time-out 120 ip ssh authentication-retries 3 ! spanning-tree mode pvst no spanning-tree optimize bpdu transmission spanning-tree extend system-id ! ! ! ! interface FastEthernet0/1 switchport access vlan 2 switchport mode access ! interface FastEthernet0/2 ! interface FastEthernet0/3 description PC_sufragerie ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 ! interface Vlan1 no ip address no ip route-cache shutdown ! interface Vlan2 description ROUTER NETWORK VLAN ip address 192.168.1.10 255.255.255.0 no ip route-cache ! interface Vlan3 no ip address no ip route-cache shutdown ! ip default-gateway 192.168.1.1 ip http server ! line con 0 line vty 0 4 login local transport input ssh line vty 5 15 login local transport input ssh ! ! end
Router:
Building configuration... Current configuration : 1897 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname main_RT ! boot-start-marker boot-end-marker ! enable secret 5 $1$8DZ4$S2FO4kIFwON9FLl6IHg6t. ! no aaa new-model ! ! dot11 syslog ! ! ip cef ! ! ip domain name cisco.com ! multilink bundle-name authenticated ! ! username beleaua secret 5 $1$dzTV$Hov/xBIJwFlZfWzlvAsbi1 ! ! archive log config hidekeys ! ! controller DSL 0 line-term cpe ! ! ! ! interface BRI0 no ip address encapsulation hdlc shutdown ! interface FastEthernet0 description Ethernet connection no ip address no ip mroute-cache duplex auto speed auto pppoe enable group global pppoe-client dial-pool-number 1 ! interface FastEthernet1 description SWITCH NETWORK switchport access vlan 2 ! interface FastEthernet2 ! interface FastEthernet8 ! interface Vlan1 no ip address ! interface Vlan2 description SWITCH NETWORK VLAN ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly no ip mroute-cache ! interface Dialer0 description ISP PPOe config ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip tcp adjust-mss 1452 no ip mroute-cache dialer pool 1 ppp authentication pap callin ppp pap sent-username BB91838414 password 0 tTzb5eVbsB ppp ipcp dns request ppp ipcp route default ppp ipcp address accept ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 Dialer0 ! ! no ip http server no ip http secure-server ip nat inside source list 1 interface Dialer0 overload ! access-list 1 permit any dialer-list 1 protocol ip permit ! ! ! ! ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 login local transport input ssh line vty 5 15 login local transport input ssh ! end
Have a great day.
Solved! Go to Solution.
04-03-2020 11:18 AM
configure the switch as below : try again.
interface FastEthernet0/7 switchport access vlan 2 switchport mode access
04-03-2020 10:50 AM
what port is your Pc connected what is the IP address of the PC. i did not see any DHCP Configuration on either of the device,.
Configure your PC IP
IP 192.168.1.10
Mask : 255.255.255.0
gateway : 192.168.1.1
DNS 8.8.8.8
04-03-2020 11:05 AM
04-03-2020 11:18 AM
configure the switch as below : try again.
interface FastEthernet0/7 switchport access vlan 2 switchport mode access
04-03-2020 11:55 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide