Switch has no bootable image

[CarsonDavis56998]

I have a 3750 that I am trying to add an image to it so that I may begin to use it however the switch itself currently does not have a bootable image. Is there any way for me to add an image to this switch with no current bootable image? Thanks

[inderdeeps]

@CarsonDavis56998 : I would say upgrade image with USB drive and add the image to the flash

https://community.spiceworks.com/how_to/68493-upgrade-cisco-ios-with-a-usb-drive 

[CarsonDavis56998]

unfortunately, the switch does not have a usb port.

[inderdeeps · Accepted solution]

@CarsonDavis56998 : Do the recovery for the switch then 

https://community.cisco.com/t5/switching/recover-c3750v2-ios-from-rommon/td-p/2233145 

[CarsonDavis56998]

thanks for your help sir, I was able to transfer a iso image using xmodem using the link you posted. Thanks!

[balaji.bandi]

ROMMON recovery :

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_55_se/commmand/reference/3750cr/bootldr.html