03-07-2005 09:29 PM - edited 03-05-2019 11:27 AM
I read somewhere that a Cat switch has the same MAC address for all the ports. Is this true? I don't have an access to a Cat switch. Thanks.
03-08-2005 03:18 AM
No.
Features on Cisco switches depend on what series they are. Information on Cisco switches and their features is available here: http://www.cisco.com/en/US/products/hw/switches/index.html.
Cheers,
Josef
03-08-2005 07:24 AM
Does this mean you will have multiple entries for a each trunk in a single etherchannel group?
Thanks.
03-10-2005 10:56 PM
Depends. If you have gigabit interfaces, you can use the interface range command:
Switch# configure terminal
Switch(config)# interface range gigabitethernet0/1 -X where X is the last interface in the range.
Otherwise if you are configuring etherchannel some configuration examples are available here http://www.cisco.com/en/US/tech/tk389/tk213/tech_configuration_examples_list.html.
Cheers,
Josef.
PS - please rate if it helps!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide