cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
706
Views
0
Helpful
5
Replies

Switch memory and invalid source mac address

elnekramer
Level 1
Level 1

Hi There!

i would llike to know what this error message on my logs mean, also in particular with the "suppressed 719 times"  .  Could this affect memory usage?  if so, how do i clear memory usage on a switch

*Nov 30 09:12:00: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 719 times)Packet received with invalid source MAC address (69:FF:F3:22:99:FF) on port Gi1/43 in vlan 345
*Nov 30 15:12:01: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 719 times)Packet received with invalid source MAC address (69:FF:F3:22:99:FF) on port Gi1/43 in vlan 345
*Nov 30 21:12:02: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 719 times)Packet received with invalid source MAC address (69:FF:F3:22:99:FF) on port Gi1/43 in vlan 345

1 Accepted Solution

Accepted Solutions

Seb Rupik
VIP Alumni
VIP Alumni

Hi,

Take a look here:

https://supportforums.cisco.com/document/21056/c4kl2man-6-invalidsourceaddresspacket-error-message-appears-catalyst-4500-series

...trace the MAC address down gi1/43 and find the misconfigured device.

cheers,

Seb.

View solution in original post

5 Replies 5

Seb Rupik
VIP Alumni
VIP Alumni

Hi,

Take a look here:

https://supportforums.cisco.com/document/21056/c4kl2man-6-invalidsourceaddresspacket-error-message-appears-catalyst-4500-series

...trace the MAC address down gi1/43 and find the misconfigured device.

cheers,

Seb.

True, found the mac address, and it seems that it was not a mac address with a valid vendor, problem is,, my switch's memory is still high, and not sure how to dump/clear the memory without rebooting

there is no way to clear or dump the memory. Only possible way is reboot the box.

HTH

REgards

Inayath

Your memory allocation being high may be a consequnece of the (valid) configuration you are running on the 4500. Are you seeing any memory related errors in the system log? 

the only one is see every now and again is:  addto_mempool_pc_array(): overflow

this is also the memory allocations:


BRY-CS1#sh mem all tot
                Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)
Processor   137ED198   209792612   127309780    82482832    80730708    80770736




Allocator PC Summary for: Processor
OVERFLOW = TRUE

    PC          Total   Count  Name
0x12353458   46507824      44  TSM Block
0x1032A124   11857428   12199  *Packet Header*
0x11D25A60    7591812     223  Interrupt Stack
0x11EB67BC    4718712       2  Routekernel Process
0x11FB49F8    3407872       1  Routekernel Process
0x11D54C38    3171108       3  Init
0x122BE0EC    3145780       1  Routekernel Process

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card