cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr
181
Views
0
Helpful
4
Replies
Highlighted
Beginner

switch mode bundle

Hi. Could you please confirm if below switch running in bundled or installed mode?.sh ver output dont display mode on the switch here.

Also please confirm if bootloader Version 16.6.2r[FC1] will support IOS Version 16.9.4 as we are planning to upgrade it from Version 16.6.4a to Version 16.9.4.

 

 

 

Cisco IOS XE Software, Version 16.06.04a
Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.6.4a, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 26-Oct-18 18:15 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.6.2r[FC1], RELEASE SOFTWARE (P)

INDRCS01 uptime is 11 days, 10 hours, 20 minutes
Uptime for this control processor is 11 days, 10 hours, 22 minutes
System returned to ROM by PowerOn at 01:12:35 GMT Wed Nov 27 2018
System restarted at 02:55:32 GMT Thu Mar 14 2020
System image file is "bootflash:cat9k_iosxe.16.06.04a.SPA.bin"
Last reload reason: PowerOn

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
network-advantage Permanent network-advantage
dna-advantage Subscription dna-advantage

cisco C9407R (X86) processor (revision V01) with 1916969K/6147K bytes of memory.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Expert

Re: switch mode bundle

16.6.2r[FC1] should work fine.

HTH

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Expert

Re: switch mode bundle

Hi,

On the 9400 series "sh ver" does not show that. Use the "sh boot" command  instead. If the device is pointing to .bin than it is in bundle mode. If the device is pointing to packages.conf than it is in install mode.

HTH

Highlighted
Beginner

Re: switch mode bundle

Thanks Reza, sh boot show .bin, could also please confirm if i need to upgrade boot loader version also to upgrade IOS from 16.06.04 to 16.9.4, current bootloader version is 16.6.2r[FC1] OR will it auto upgrade.

 

INDRCS01#show boot
BOOT variable = bootflash:cat9k_iosxe.16.06.04a.SPA.bin;
Configuration Register is 0x102
MANUAL_BOOT variable = no
BAUD variable = 9600
ENABLE_BREAK variable does not exist

 

============================================

 

 

ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.6.2r[FC1], RELEASE SOFTWARE (P)


System image file is "bootflash:cat9k_iosxe.16.06.04a.SPA.bin"
Last reload reason: PowerOn

Highlighted
Hall of Fame Expert

Re: switch mode bundle

16.6.2r[FC1] should work fine.

HTH

View solution in original post

Highlighted
Hall of Fame Community Legend

Re: switch mode bundle

16.6.4a is a really, really old firmware.
CreatePlease to create content
Content for Community-Ad