LEDs are blinking abnormally

[Ipefixe]

Hello,

I have just bought a new Cisco WS-C2960L-16PS-LL switch, but this one encounters an error that I cannot resolve.

I have cameras, AP and computer connected to it, the traffic is therefore heavy and the LEDs are supposed to flash very quickly.
This is not the case, because all the LEDs of the connected equipment flash once per second.

Anyone has an idea ?

Thank you in advance and have a good day

[marce1000]

 - Shouldn't worry too much if the camera's work normally, on some models the traffic indicating patterns have been modified and or are more relaxing,

 M.

[Marlon AJ · Accepted solution]

Hi @Ipefixe ,

Here is some cisco documentation about the LED indicators in the different modes (Cisco switch 9200):

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/hardware/install/b-c9200-hig/b-c9200l-hig_appendix_0101.html

And here is a discussion from 2018 for the cisco switch 2960x LED indicators:

https://community.cisco.com/t5/switching/2960x-syst-led/td-p/3413770

Hope this helps, regards!