02-13-2019 10:01 AM - edited 03-08-2019 05:19 PM
I have a ws-c3750v2-48ps switch I am re-purposing for the time being and when loading it up (not attached to any other switch) it keeps loading thinking that it is part of a switching stack and being designated as Master role. Is this normal for that particular type of switch? I have tried write erase and reload twice and it keeps doing the same thing. Now this will eventually connect to another single switch to eventually make a stack but not sure if this will cause an issue.
Thanks
Solved! Go to Solution.
02-13-2019 10:15 AM
- It is probably normal because the device is stack-capable by default. If you want to assign to another or a new stack, you can set stack-priorities before making the physical connections, so that >you can decide which one will be the master,
M.
02-13-2019 10:15 AM
- It is probably normal because the device is stack-capable by default. If you want to assign to another or a new stack, you can set stack-priorities before making the physical connections, so that >you can decide which one will be the master,
M.
02-13-2019 10:23 AM
02-13-2019 10:35 AM
I know you have tried reset to factory default. can you connect the console cable and post the boot process, once booted can post show running to understand, is this erased correctly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide