cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
245
Views
0
Helpful
3
Replies
Rsbell
Beginner

Switch Stacking

I have a ws-c3750v2-48ps switch I am re-purposing for the time being and when loading it up (not attached to any other switch) it keeps loading thinking that it is part of a switching stack and being designated as Master role. Is this normal for that particular type of switch? I have tried write erase and reload twice and it keeps doing the same thing. Now this will eventually connect to another single switch to eventually make a stack but not sure if this will cause an issue.

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
marce1000
VIP Advisor

 

 - It is probably normal because the device is stack-capable by default. If you want to assign to another or a new stack, you can set stack-priorities before making the physical connections, so that >you can decide which one will be the master,

M.

View solution in original post

3 REPLIES 3
marce1000
VIP Advisor

 

 - It is probably normal because the device is stack-capable by default. If you want to assign to another or a new stack, you can set stack-priorities before making the physical connections, so that >you can decide which one will be the master,

M.

View solution in original post

luis_cordova
VIP Advisor
balaji.bandi
VIP Master

I know you have tried reset to factory default. can you connect the console cable and post the boot process, once booted can post show running to understand, is this erased correctly.

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help