Switch Stacking

[KM2018]

Hi All,

we have 3  New 9300-48P devices to stack, I have gone through the stacking architecture documents. But still want to reconfirm.

Step 1: IOS upgrade 

Step 2: Console each switch and Configure Stack priority 

Step 3: Hardware stack cabling and racking.  

Step4: configuration and implementation. 

What will happen if I hardware stack cable all 3 devices and configure the SW priority from single console ?

Thanks 

KM

[balaji.bandi · Accepted solution]

the proceedure same as mentioned 1-4 steps , you can re-number or repriority once stacking can also be done  -  for the best take effect you need to reboot.

always conside to split the uplink Switch1 and Switch2 (they master and slave) so the link maintainined for the uplink.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/white-paper-c11-741468.html