Switch to terminate 100Gig point to point L2 link from SP

[raghav.rai]

Hello,

Can you please suggest me a switch to terminate 100gig link to terminate a L2  point to point link from service provider. Switch should support Q in Q and Link Loss Forwarding ( Interface of the switch should go down if L2 link from provider fails).

Tks,

Raghavendra

[balaji.bandi]

You can look  Cat 9300 and with Uplink Module 100G

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-architecture-cte-en.html

or Cat 9500 (if you have budget)

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9500-series-switches/nb-06-cat9500-ser-data-sheet-cte-en.html

QinQ support cat 9K for refernce :

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-switch/217726-configure-and-verify-and-troubleshoot-qi.html

[raghav.rai]

Thank you but Cisco feature navigatore does not show 9200/9300 supports Q in Q feature. Also Link Loss forwarding is not supported on these switches. I am looking for something like Metro Ethernet Swicthes that Cisco had couple of years back. Do we have Metro Ethernet equivallent swicthes now?

[balaji.bandi]

OP question you  looking 100GB connection and QinQ support- we suggested Cat 9300 or Cat 9500 For Ethernet connection.

If you looking carrier grade - suggest to contact Local partner with you requirement, they have sales tool and give you exact model for your use case.

Other models you can look :

https://www.cisco.com/c/en/us/products/collateral/routers/network-convergence-system-5000-series/datasheet-c78-736153.html

New Platform Cat 8K -  (please check the product guide and your features can support)  - not sure or come across has 100GB support ?

https://www.cisco.com/c/en/us/products/routers/cloud-edge/index-b.html#/

[MHM Cisco World]

9K is new series of cisco SW.
connect Cisco for more support for platform select.