cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
639
Views
0
Helpful
4
Replies

switchport access

hugh.lancaster
Level 1
Level 1

Need some help or it may not matter, I have two controllers trunked. One to int 4/0/17 and worked fine I added the other controller to 4/0/17 and I am having issues.

fa 4/0/18 displays, "switchport access vlan5".

fa 4/0/17 does not.  Do I need to remove that and how?

interface FastEthernet4/0/17

description Wire_Control

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 1,5

switchport mode trunk

storm-control broadcast level 10.00

macro description cisco-desktop | cisco-desktop

spanning-tree portfast

spanning-tree bpduguard enable

!

interface FastEthernet4/0/18

description Wireless Controller ip 10.100.0.49

switchport access vlan 5

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 1,5

switchport mode trunk

switchport nonegotiate

storm-control broadcast level 10.00

macro description cisco-desktop | cisco-desktop | cisco-desktop

spanning-tree portfast

spanning-tree bpduguard enable

1 Accepted Solution

Accepted Solutions

glen.grant
VIP Alumni
VIP Alumni