System returned to ROM by address error at PC 0x0, address 0x0 on 3560 switch

[akash04lingam]

                   We have observed that one of the 3560 switch was rebooted with "System returned to ROM by address error at PC 0x0, address 0x0"

                    Please explain us about this erro message.

                    I have attached the sh version and log details.

                    Thanks,

                    Akasalingam

[Richard Burts]

Akasalingam

That problem may reflect a hardware failure or it might be a software bug. In either case the best option would be to open a case with Cisco TAC.

HTH

Rick

[d-costa]

Hello,

We have this issue too.

Anyone can confirm if this is a hardware or software issue?

Thanks,

David

[Leo Laohoo]

Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(52)SE, RELEASE SOFTWARE (fc3)

Gee.  All it took was to read the first line of your attachment ... 

Upgrade your switch to a more stable IOS version, like 12.2(55)SE9.  The IOS this appliance is currently running is one of the most buggiest IOS I've tested.