01-13-2021 07:04 PM
I am experiencing network difficulties.
Therefore, I am curious if the TDR cable diagnosis status is normal.
The connected device is ATA.
Some ATAs operate at 10M half-duplex.
Who can help me?
Solved! Go to Solution.
01-13-2021 07:18 PM
The output is from a Catalyst 4k/6k?
NOTE:
Gi 7/36: If this is an ATA, it is GOOD.
Gi 7/36: First fair is faulty (Open). Fault is about 5 metres away from the switch.
Gi 7/38: WTF is that output!
Gi 7/41: WTF is that output!
01-13-2021 07:18 PM
The output is from a Catalyst 4k/6k?
NOTE:
Gi 7/36: If this is an ATA, it is GOOD.
Gi 7/36: First fair is faulty (Open). Fault is about 5 metres away from the switch.
Gi 7/38: WTF is that output!
Gi 7/41: WTF is that output!
01-20-2021 09:54 AM
Do you think there is a cable issues in Gi 7/38, 41?
01-20-2021 01:59 PM
What IOS version and what is the uptime of the switch?
01-24-2021 10:37 PM
WS-C4507R+E
Version 03.04.04.SG RELEASE SOFTWARE (fc2)
01-24-2021 11:27 PM
@JustTakeTheFirstStep wrote:
Version 03.04.04.SG RELEASE SOFTWARE (fc2)
I have used this exact IOS-XE version on a Sup7E and all I can say is this: Using TDR on a firmware like this can be, putting it mildly, "frustrating".
I would recommend upgrading the firmware to a more recent version.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide