TFTP = wtf!?!

[DigitalWhitewater]

Hi All,

  Thanks in advance for any help.

  Here's my issue. I'm using the archive cmd in IOS 12.2(25)SEE1 on a Catalyst 3560G-24PS to backup my configs to a tftp server (solarwinds). It's set to automatically upload on a 'wr mem' cmd. It works fine on 6 other 3560G switches with the same IOS, but on this one it will always error out and fail.

  I can ping the switch from the server. I can ping the server from the switch. Firewall is disabled. When i do a 'wr mem' and it will reach the server, create the file, and then fail. It has yet to do anything other then make a 0kb file.

Anybody have any ideas?

Mahalo,

DigitalWhitewater

PS- this is a similiar post I found - https://supportforums.cisco.com/message/601583

[donlindsay70]

what happens when you try to tftp the config back manually to the tftp server. Also check if the tftp server is set to allow overwrites on existing files.

Regards

Don

[DigitalWhitewater]

It seems to have just been solarwinds tftp server. I switched to tftpd64 (the 64bit version of tftpd32) and things are working as expected. Thanks for your help though.