Total VWIC2 cards supported on 2801

[tarekaljallad]

How many of the VWIC2-2MFT-T1/E1 can be used in the 2801, all for data?

I know here it mentions how many slots support what, but its a bit confusing, and I remember having trouble bringing up the card in slot 2 and had to move card to third slot, I'm running 12.4(25b), and need to add 2 more T1 interface for a total of 6, all for data.

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/ps5882/product_data_sheet0900aecd8016fa68_ps5854_Products_Data_Sheet.html

• 4 slots; 2 slots support HWIC, WIC, VIC, or VWIC type modules

• 1 slot supports WIC, VIC, or VWIC type modules

• 1 slot supports VIC or VWIC type modules

[Leo Laohoo]

Kindly refer to the data sheet below:

Cisco 2nd Generation 1 and 2 Port T1E1 Multiflex Trunk Voice WAN Interface Cards

[tarekaljallad]

That document does not specify if all slots in the 2801 support it, only that the card is supported in general. Can anyone confirm if it will run in slots 2 and 4?

[tarekaljallad]

Since I'm using these ports for data, will a HWIC-4T1/E1 run on a 2801?

[srereddy]

Hello,

Usually the VWIC are supported on slot 2 or 3. So the VWIC2-2MFT-T1/E1 should work in slot 2. Could you post 'show diag' when you had the module in slot 2

And to answer your question - the HWIC-4T1/E1 is 'not' supported on 2801 router.

HTH

PS: Rate all the posts if it answers your question.