tranceiver modules compatibility

[zappo0305]

Our Cisco 10GBase Xenpak module is faulty. Can I reaplce it with x2-10GB-LR - Are they compatible?

Thanks

[sdheer]

Hi,

Please find below the transciever compatibility matrix.A link bteween the two links will come up only if transciever on both ends are compatible.

The possible ways to connect the transceiver modules.

X2-10GB-LX4-------------XENPAK-10GB-LX4

X2-10GB-LX4------------X2-10GB-LX4

X2-10GB-SR-------------X2-10GB-SR

XENPAK-10GB-SR---------XENPAK-10GB-SR

XENPAK-10GB-SR---------X2-10GB-SR

HTH.

Regards,
Swati

Please rate if you find content useful

[zappo0305]

How can I find out whether the module is a xenpak? I looked on the net and the module look like a xenpak, like this one:

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5251_Products_Data_Sheet.html

but when i check the module info, i get different info:

switch1#sh int tenGigabitEthernet 5/2 capabilities

TenGigabitEthernet5/2

  Dot1x:                 yes

  Model:                 WS-SUP32-10GE-3B

  Type:                  10Gbase-LR

  Speed:                 10000

  Duplex:                full

  Trunk encap. type:     802.1Q,ISL

  Trunk mode:            on,off,desirable,nonegotiate

  Channel:               yes

  Broadcast suppression: percentage(0-100)

  Flowcontrol:           rx-(off,on),tx-(off,on)

  Membership:            static

  Fast Start:            yes

  QOS scheduling:        rx-(2q8t), tx-(1p3q8t)

  CoS rewrite:           yes

  ToS rewrite:           yes

  Inline power:          no

  SPAN:                  source/destination

  UDLD                   yes

  Link Debounce:         yes

  Link Debounce Time:    yes

  Ports on ASIC:         2-3

  Port-Security:         yes

[sdheer]

Hi,

The transciever module is 10Gbase-LR .The other side of the transciever should be also 10Gbase-LR  for the link to come up.

Regards,

Swati