Trunk lines - management interface - default GW

[joeadiutori]

Hi All,

What is the default gateway of switch 2?  Assume trunk lines from router to switch, and from switch to switch.  The IP's on the switches are management interface VLAN's.  My initial thought is the router (10.0.0.1) is the default GW, but now I'm not so sure.

Thank You - Joe

[Reza Sharifi · Accepted solution]

Hi Joe,

You are correct.  It is going to be 10.0.0.1 for both switch 1 and 2

HTH

[joeadiutori]

thanks for the info !!!