cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8154
Views
36
Helpful
18
Replies

Turn On NTP Distribute NXOS

Shaqxify
Level 1
Level 1

Hi Guys,

I had posted something yesterday on NTP not working. I just noticed that NTP distribution is disabled on the Nexus C3548P. How do I turn it on?

I have included outputs for the following:-

Sh feature

Sh ver

sh ntp status

-CSW-001# sh ntp stat
^
% Ambiguous command at '^' marker.
HQS-BF-CSW-001# sh ntp statu
Distribution : Disabled
Last operational state: No session
HQS-BF-CSW-001#
HQS-BF-CSW-001#
HQS-BF-CSW-001#
HQS-BF-CSW-001# sh fe?
feature Show feature status
feature-set Show feature set status

HQS-BF-CSW-001# sh fea
^
% Ambiguous command at '^' marker.
HQS-BF-CSW-001# sh fea
feature feature-set
HQS-BF-CSW-001# sh feature
Feature Name Instance State
-------------------- -------- --------
Flexlink 1 disabled
analytics 1 disabled
bash-shell 1 disabled
bfd 1 disabled
bgp 1 disabled
bulkstat 1 disabled
cable-management 1 disabled
catena 1 disabled
container-tracker 1 disabled
macsec 1 disabled
dhcp 1 disabled
dot1x 1 disabled
eigrp 1 disabled
eigrp 2 disabled
eigrp 3 disabled
eigrp 4 disabled
eigrp 5 disabled
eigrp 6 disabled
eigrp 7 disabled
eigrp 8 disabled
eigrp 9 disabled
eigrp 10 disabled
eigrp 11 disabled
eigrp 12 disabled
eigrp 13 disabled
eigrp 14 disabled
eigrp 15 disabled
eigrp 16 disabled
eth-port-sec 1 disabled
evb 1 disabled
evc 1 disabled
evmed 1 disabled
fabric-access 1 disabled
fabric_mcast 1 disabled
grpc 1 disabled
hardware-telemetry 1 disabled
hmm 1 disabled
hsrp_engine 1 disabled
icam 1 disabled
imp 1 disabled
interface-vlan 1 enabled
isis 1 disabled
isis 2 disabled
isis 3 disabled
isis 4 disabled
isis 5 disabled
isis 6 disabled
isis 7 disabled
isis 8 disabled
isis 9 disabled
isis 10 disabled
isis 11 disabled
isis 12 disabled
isis 13 disabled
isis 14 disabled
isis 15 disabled
isis 16 disabled
itd 1 disabled
l2vpn 1 disabled
l3vpn 1 disabled
lacp 1 disabled
ldap 1 disabled
ldp 1 disabled
license-smart 1 disabled
lldp 1 enabled
mpls-evpn 1 disabled
mpls_oam 1 disabled
mpls_static 1 disabled
msdp 1 disabled
mvrp 1 disabled
nat 1 disabled
nbm 1 disabled
netconf 1 disabled
ngmvpn 1 disabled
ngoam 1 disabled
npiv 1 disabled
nve 1 disabled
nxapi 1 disabled
nxsdk_app1 1 disabled
nxsdk_app10 1 disabled
nxsdk_app11 1 disabled
nxsdk_app12 1 disabled
nxsdk_app13 1 disabled
nxsdk_app14 1 disabled
nxsdk_app15 1 disabled
nxsdk_app16 1 disabled
nxsdk_app17 1 disabled
nxsdk_app18 1 disabled
nxsdk_app19 1 disabled
nxsdk_app2 1 disabled
nxsdk_app20 1 disabled
nxsdk_app21 1 disabled
nxsdk_app22 1 disabled
nxsdk_app23 1 disabled
nxsdk_app24 1 disabled
nxsdk_app25 1 disabled
nxsdk_app26 1 disabled
nxsdk_app27 1 disabled
nxsdk_app28 1 disabled
nxsdk_app29 1 disabled
nxsdk_app3 1 disabled
nxsdk_app30 1 disabled
nxsdk_app31 1 disabled
nxsdk_app32 1 disabled
nxsdk_app4 1 disabled
nxsdk_app5 1 disabled
nxsdk_app6 1 disabled
nxsdk_app7 1 disabled
nxsdk_app8 1 disabled
nxsdk_app9 1 disabled
nxsdk_mgr 1 disabled
onep 1 disabled
openflow 1 disabled
ospf 1 disabled
ospf 2 disabled
ospf 3 disabled
ospf 4 disabled
ospf 5 disabled
ospf 6 disabled
ospf 7 disabled
ospf 8 disabled
ospf 9 disabled
ospf 10 disabled
ospf 11 disabled
ospf 12 disabled
ospf 13 disabled
ospf 14 disabled
ospf 15 disabled
ospf 16 disabled
ospfv3 1 disabled
ospfv3 2 disabled
ospfv3 3 disabled
ospfv3 4 disabled
ospfv3 5 disabled
ospfv3 6 disabled
ospfv3 7 disabled
ospfv3 8 disabled
ospfv3 9 disabled
ospfv3 10 disabled
ospfv3 11 disabled
ospfv3 12 disabled
ospfv3 13 disabled
ospfv3 14 disabled
ospfv3 15 disabled
ospfv3 16 disabled
pbr 1 disabled
pim 1 disabled
pim6 1 disabled
plb 1 disabled
pnp 1 disabled
poe 1 disabled
private-vlan 1 disabled
privilege 1 disabled
ptp 1 disabled
restconf 1 disabled
rip 1 disabled
rip 2 disabled
rip 3 disabled
rip 4 disabled
rise 1 disabled
scheduler 1 disabled
scpServer 1 disabled
segment-routing 1 disabled
sflow 1 disabled
sftpServer 1 disabled
sla_responder 1 disabled
sla_sender 1 disabled
sla_twamp 1 disabled
smart-channel 1 disabled
srte 1 disabled
sshServer 1 enabled
tacacs 1 disabled
telemetry 1 disabled
telnetServer 1 enabled
tunnel 1 disabled
udld 1 disabled
vmtracker 1 disabled
vni 1 disabled
vnseg_vlan 1 disabled
vpc 1 disabled
vrrp 1 disabled
vrrpv3 1 disabled
vtp 1 enabled

-CSW-001# sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (C) 2002-2018, Cisco and/or its affiliates.
All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source. This software is provided "as is," and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0 or the GNU
Lesser General Public License (LGPL) Version 2.1 or
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://opensource.org/licenses/gpl-3.0.html and
http://www.opensource.org/licenses/lgpl-2.1.php and
http://www.gnu.org/licenses/old-licenses/library.txt.

Software
BIOS: version 5.0.0
NXOS: version 9.2(2)
BIOS compile time: 05/22/2018
NXOS image file is: bootflash:///nxos.9.2.2.bin
NXOS compile time: 11/4/2018 21:00:00 [11/05/2018 07:25:06]


Hardware
cisco Nexus3500 C3548P-10GX Chassis
Intel(R) Pentium(R) CPU @ 2.00GHz with 4030540 kB of memory.
Processor Board ID FOC24153UBQ

Device name: HQS-BF-CSW-001
bootflash: 3800064 kB
usb1: 0 kB (expansion flash)
usb2: 0 kB (expansion flash)

Kernel uptime is 2 day(s), 13 hour(s), 33 minute(s), 39 second(s)

Last reset
--More--


HQS-BF-CSW-001#

 

 

18 Replies 18

balaji.bandi
Hall of Fame
Hall of Fame

There may be confusion here.

 

Your NTP Server IP address 0.100.2.130  and you configured on client  ntp server 10.100.1.130 prefer

 

Please clarify?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

@balaji.bandiOh no!!! I might be the problem (I call it a layer 8 problem). Allow me to fetch a stick to hit myself then amend the configs accordingly.

I do deeply appreciate your help.

Regards & Respect,

Shaqx

Hello @balaji.bandi Working okay now. Thank you very much.

 

ASW-001#sh ntp sta
Clock is synchronized, stratum 3, reference is 10.100.2.130
nominal freq is 250.0000 Hz, actual freq is 250.0051 Hz, precision is 2**10
ntp uptime is 18185800 (1/100 of seconds), resolution is 4000
reference time is E3849A37.70A3D840 (15:51:43.440 CAT Wed Dec 16 2020)
clock offset is 28.7929 msec, root delay is 1.92 msec
root dispersion is 68.93 msec, peer dispersion is 1.01 msec
loopfilter state is 'CTRL' (Normal Controlled Loop), drift is -0.000020431 s/s
system poll interval is 512, last update was 1986 sec ago.
ASW-001#

 

Regards & Respect

Shaqx

 

balaji.bandi
Hall of Fame
Hall of Fame

Gladall good , we mark as resolved now.

 

if that is working please input and mark as resolved please, that will help other community members your input valuble.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Review Cisco Networking for a $25 gift card