12-05-2017 03:29 PM - edited 03-08-2019 01:00 PM
C7606-S#sh platform hardware acl global-config
CM global configurations:
Update mode: hitless
Default result: deny
Match L4 protocols:
Real protocol value: 47, encoded value: 9
Reserved QoS Banks:
Current 1 banks
Latest set 1 banks
After next reload 1 banks
Rbacl is not enabled
Sgt-dgt region 45%, any-any region 5%
Hardware consistency checker is ON
TCAM expandable logic is OFF
Acl logging is DISABLED
How do I turn on TCAM expandable logic and ACL logging ?
Thank you.
12-06-2017 01:40 PM
PLease help.
THanks
12-21-2017 02:55 PM
nobody knows about how to turn ACL logging on ?
12-21-2017 03:37 PM
can u please share the below outputs:
- show module
- show version | in image
12-28-2017 03:47 PM
C7606-S#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL09222A0P
6 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G SAL17299S0A
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0014.694c.cf78 to 0014.694c.cf7b 2.2 12.2(18r)S1 15.4(1)SY2 Ok
6 2c54.2dc3.ca7f to 2c54.2dc3.ca86 1.5 12.2(50r)SYS 15.4(1)SY2 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL09222EJC 2.0 Ok
6 Policy Feature Card 4 VS-F6K-PFC4 SAL17152SNZ 2.0 Ok
6 CPU Daughterboard VS-F6K-MSFC5 SAL17299WVK 2.0 Ok
Mod Online Diag Status
---- -------------------
1 Pass
6 Pass
C7606-S#
C7606-S#show version | in image
System image file is "bootdisk:/s2t54-advipservicesk9-mz.SPA.154-1.SY2.bin"
01-03-2018 03:10 PM
01-16-2018 03:12 PM
HELP ME VINIT
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide