Turn on TCAM expandable logic and ACL logging

[nik.leckuthai]

C7606-S#sh platform hardware acl global-config
CM global configurations:

Update mode: hitless

Default result: deny

Match L4 protocols:
Real protocol value: 47, encoded value: 9

Reserved QoS Banks:
Current 1 banks
Latest set 1 banks
After next reload 1 banks

Rbacl is not enabled
Sgt-dgt region 45%, any-any region 5%

Hardware consistency checker is ON

TCAM expandable logic is OFF

Acl logging is DISABLED

How do I turn on TCAM expandable logic and ACL logging ? 

Thank you.

[nik.leckuthai]

PLease help.

THanks

[nik.leckuthai]

nobody knows about how to turn ACL logging on ? 

[Vinit Jain]

can u please share the below outputs:

- show module

- show version | in image

[nik.leckuthai]

C7606-S#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL09222A0P
6 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G SAL17299S0A

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0014.694c.cf78 to 0014.694c.cf7b 2.2 12.2(18r)S1 15.4(1)SY2 Ok
6 2c54.2dc3.ca7f to 2c54.2dc3.ca86 1.5 12.2(50r)SYS 15.4(1)SY2 Ok

Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL09222EJC 2.0 Ok
6 Policy Feature Card 4 VS-F6K-PFC4 SAL17152SNZ 2.0 Ok
6 CPU Daughterboard VS-F6K-MSFC5 SAL17299WVK 2.0 Ok

Mod Online Diag Status
---- -------------------
1 Pass
6 Pass
C7606-S#
C7606-S#show version | in image
System image file is "bootdisk:/s2t54-advipservicesk9-mz.SPA.154-1.SY2.bin"

[nik.leckuthai]

Vinit Jain please help

C7606-S#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL09222A0P
6 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G SAL17299S0A

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0014.694c.cf78 to 0014.694c.cf7b 2.2 12.2(18r)S1 15.4(1)SY2 Ok
6 2c54.2dc3.ca7f to 2c54.2dc3.ca86 1.5 12.2(50r)SYS 15.4(1)SY2 Ok

Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL09222EJC 2.0 Ok
6 Policy Feature Card 4 VS-F6K-PFC4 SAL17152SNZ 2.0 Ok
6 CPU Daughterboard VS-F6K-MSFC5 SAL17299WVK 2.0 Ok

Mod Online Diag Status
---- -------------------
1 Pass
6 Pass
C7606-S#show version | in image
System image file is "bootdisk:/s2t54-advipservicesk9-mz.SPA.154-1.SY2.bin"

[nik.leckuthai]

HELP ME VINIT