Two Cable Modems on Translated Vlan and LACP on Catalyst 3750

benjaminmc678831651 · ‎06-16-2023

Hi!

I have two cable modems on two ISPs that I need to have their Vlan translated on the 3750 from "1" to "55" for one, and "1" to "494" for the other. I also need to have LACP on these 4 interfaces if possible. How do I do this?

marce1000 · ‎06-16-2023

- Use the switchport access vlan vlan-id command to change the vlan a port will be operating in , for LACP have a look at https://www.cisco.com/c/en/us/td/docs/ios/12_2sb/feature/guide/gigeth.html#wp1089298

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

benjaminmc678831651 · ‎06-17-2023

Yes, but this doesn't translate the VLAN from 1 to 55.

MHM Cisco World · ‎06-16-2023

For lacp since there is two different ISP router/modem then you can not

For vlan mapping check link below

https://ipcisco.com/lesson/vlan-mapping-vlan-translation-on-cisco/

benjaminmc678831651 · ‎06-17-2023

This is incorrect. I don't have this command, and I CAN do LACP with BOTH cable modems.