03-07-2024 03:03 AM
Hi Team,
Please help me on how to configure two p2p links failover between Cisco Sw ie. one in HO and Branch office.
1. p2p network link one - 173.173.173.1/22 & 173.173.173.5/22
2. p2p network link two - 174.174.174.1/22 & 174.174.174.5/22
03-07-2024 03:41 AM
Config p2p link' and then add static route one with high AD and other with ip sla.
MHM
03-07-2024 04:03 AM
Thanks for response.
Can you please elaborate the detailed command. It would be very helpful.
03-07-2024 03:17 PM
One small remark regarding the IP addressing of the two P2P links - on these kind of links there are only two hosts talking to each other and for these reason, in order to conserve IP addresses, you would only need a /30 subnet.
An addressing scheme following design best practices would be:
1. p2p network link one - 173.173.173.1/30 & 173.173.173.2/30
2. p2p network link two - 174.174.174.1/30 & 174.174.174.2/30
Hope it helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide