Running 3750 in stack Version 15.0(2)SE2
I am geting error when trying to add vrf vlan int
switch(config-if)#ip vrf forwarding dummy
% CEF table 0x6 does not exist (Vlan101).
Yes i did
switch#sh run vrf dummy
Current configuration : 360 bytes
ip vrf dummy rd 65529:1
route-target export 65529:1
route-target import 65529:1
Regarding your 2nd query
Index 1 Feature: ipservices
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
Yes Cef is by default on the switch i believe
switch#sh ip cef
Prefix Next Hop Interface
0.0.0.0/0 10.34.68.1 FastEthernet0
10.34.68.0/24 attached FastEthernet0
10.34.68.0/32 receive FastEthernet0
10.34.68.1/32 attached FastEthernet0
10.34.68.2/32 attached FastEthernet0
10.34.68.11/32 attached FastEthernet0
10.34.68.13/32 attached FastEthernet0
10.34.68.14/32 attached FastEthernet0
10.34.68.15/32 receive FastEthernet0
10.34.68.255/32 receive FastEthernet0
10.145.172.0/32 receive Virtual3
Did you ever get a fix for this issue? I have the same issue, recently licensed to IP Services image to be able to configure VRF lite im running on the exact same image as yours 15.0(2)SE2.
% CEF table 0x2 does not exist (Vlan1901).
I raised with our support who escalated to Cisco, they reported they couldn't re-create the fault and requested a reload of the stack which I have done but hasn't clear the fault?
I have tried to delete vrf and vlans.
Tried it ont another vlan interface but same error
Tried creating vrf using vrf defination.
getting same erro when tring to add vrf to loopback interface too,
switch(config-if)#ip vrf forwarding test
% CEF table 0x9 does not exist (Loopback1).
Cant reboot have to get a pew window.