Unable to get PoE data via SNMP on CBS220-16P-2G

[jmm22]

I am able to retrieve PoE data via the CLI and the web interface, but I am unable to find these data in any of the MIBs.
please advise.

thanks,

James.

cbs220#sh pow i c
Power management mode: Port limit mode
Legacy device supports: disabled
Unit Power Status Nominal Allocated Consumed Available Usage Traps
Power Power Power Power Threshold
---- ----- ------ -------- --------------- -------- --------- --------- -------
1 On Normal 130Watts 18Watts (13%) 18Watts 112Watts 95 enabled

Port Power Limit (Admin) (mW) Power (mW) Voltage (mV) Current (mA)
---- ------------------------ ---------- ------------ ------------
gi1 30000 (30000) 0 0 0
gi2 30000 (30000) 0 0 0
gi3 30000 (30000) 0 0 0
gi4 30000 (30000) 0 0 0
gi5 30000 (30000) 0 0 0
gi6 30000 (30000) 0 0 0
gi7 30000 (30000) 0 0 0
gi8 30000 (30000) 0 0 0
gi9 30000 (30000) 3500 54800 66
gi10 30000 (30000) 1100 54800 22
gi11 30000 (30000) 3000 54700 58
gi12 30000 (30000) 2800 54700 53
gi13 30000 (30000) 1900 54700 36
gi14 30000 (30000) 1900 54700 37
gi15 30000 (30000) 1400 54800 28
gi16 30000 (30000) 3000 54800 57
cbs220# sh ve
Cisco CBS220 Series Switch Software, Version 2.0.2.14, RELEASE SOFTWARE
Copyright (c) 2024 by Cisco Systems, Inc.
Compiled Mar 20 2024 - 15:49:00

ROM: Bootstrap program is CBS220 boot loader
BOOTLDR: CBS220 Boot Loader Version 1.0.0.17, RELEASE SOFTWARE
Compiled Jun 23 2021 - 13:30:35

cbs220 uptime is 0 days, 0 hours, 17 mins, 55 secs
system image is image-2

Processor 500MHz, with 256M bytes of memory.
18 Gigabit Ethernet interfaces
0 Fast Ethernet interfaces

64M bytes of flash memory
Base MAC Address : 90:E9:5E:XX:XX:XX
IP Address : 10.x.x.x
Subnet Mask : 255.255.255.0
Model Number : CBS220-16P-2G
Serial Number : DNIXXXXXXXX
PID : CBS220-16P-2G
VID : V03

[user@monitoring ~]$ snmpwalk -Cc -c public -v 1 cbs220 iso | egrep '54\.8|54800'
[user@monitoring ~]$

[marce1000]

 - Ref : https://www.reddit.com/r/Cisco/comments/7cr1e7/is_there_an_snmp_oid_to_get_power_draw_on_a_poe/
           Yet I think the small business devices do no support those MIBS , 

 M

[balaji.bandi]

These are Lowest model of of the switch, not that i am aware of that support. all the features you looking.

check you can download MIB and check any options :

https://www.cisco.com/c/en/us/support/switches/business-220-series-smart-switches/series.html#~tab-downloads

[jmm22]

Thanks - I tried all of those mibs (and walking from the root), and found nothing (I already tried all the mibs that work for the big catalyst switch it's plugged into). It's a shame, the other vendor's switches at this price point have this feature, but I really wanted to use these cisco ones:

DGS-1210-28P-CX::poePortPower.1.7 = STRING: 3.4
DGS-1210-28P-CX::poePortPower.1.8 = STRING: 1.6
DGS-1210-28P-CX::poePortPower.1.9 = STRING: 2.4
[..]
DGS-1210-28P-CX::poePortVoltage.1.7 = STRING: 53.6
DGS-1210-28P-CX::poePortVoltage.1.8 = STRING: 53.6
DGS-1210-28P-CX::poePortVoltage.1.9 = STRING: 53.7
[..]
DGS-1210-28P-CX::poePortCurrent.1.7 = STRING: 66.0
DGS-1210-28P-CX::poePortCurrent.1.8 = STRING: 29.0
DGS-1210-28P-CX::poePortCurrent.1.9 = STRING: 47.0