Hello Experts,
Can someone please take a look at my configurations and let me know why I'm not able to ping 200.1.1.2 from ALSW-9 and I'm not able to ping 100.1.1.2 from ALSW-10.?
This is despite that the etherchannels are up and running,
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
1 Po1(RU) LACP Et0/0(P) Et0/1(P)
Also routing to the ip addresses is in both tables for DLSW-4 and DLSW-5
200.1.1.0/30 is subnetted, 1 subnets
D 200.1.1.0 [90/130816] via 172.16.1.2, 01:24:55, Port-channel1
DLSW-4#
100.0.0.0/30 is subnetted, 1 subnets
D 100.1.1.0 [90/130816] via 172.16.1.1, 01:25:49, Port-channel1
DLSW-5#
And there full eigrp neighbor relationship between DLSW-4 and DLSW-5
DLSW-4#show ip eigrp neighbors
EIGRP-IPv4 Neighbors for AS(100)
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.1.2 Po1 11 00:06:18 4 100 0 5
DLSW-5#show ip eigrp neighbors
EIGRP-IPv4 Neighbors for AS(100)
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.1.1 Po1 12 00:06:59 1 100 0 5
I have attached the configuration and topology
You're help will be much appreciated.
Cheers
Carlton
