Re: unrecognizable characters while taking console for 3945 Router

Sijo Mathew · ‎05-02-2019

getting unrecognised characters while taking the console. tried changing speed but no hope..

marce1000 · ‎05-02-2019

- What operator/terminal infrastructure are you using ? Anyway use speed of 9600. If no go reboot the device and tape the space bar during the boot. Check if this helps.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Sijo Mathew · ‎05-02-2019

Hi Marce,

am using putty , tried rebooting the device by tapping space.. no hope..

the bellow image that i can see once the device is booted

Kasun Bandara · ‎05-02-2019

Hi,

use 9600 as baudrate. also check your console cable and usb converter if using. sometimes, converters giving this kind of issues. is same cable and converters working properly, this can be a OS corruption which you have to use RMA procedure.

regards,

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB