cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2547
Views
15
Helpful
10
Replies

Upgrade Cisco 4507R IOS from 12.2 to 15.0.2

elaz76213
Level 1
Level 1

Dear All,

 

I am new to switching, I have a Catalyst 4507R switch (cat4000-I9S-M), Version 12.2(18)EW.

 

I would like to know if there are any bugs related to this version. Could you please tell if it is the case?

 

I would also like to upgrade the ios to Version 15.0.2. Could you please tell me if it is possible to do this upgrade? or if there is a recommanded upgrade path?

 

Thanks in advance.

2 Accepted Solutions

Accepted Solutions

For your sup, the latest IOS is this

cat4500-entservicesk9-mz.150-2.SG11.bin

 

You may also want to upgrade the Rommon to this version.

Release 12.2(31r)SGA4 

HTH

View solution in original post

Follow below guide for ROM upgrade and later IOS upgrade.

 

make sure you take backup of currnet config out of the box.

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_24727.html

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

10 Replies 10

Reza Sharifi
Hall of Fame
Hall of Fame

What sup do you have?

HTH

Hello Reza,

I am sorry to ask, but what do you mean by sup ? thanks in advance.

 

Hi,

Sorry, sup is short for supervisor module.

 HTH

balaji.bandi
Hall of Fame
Hall of Fame

what is supervisor module you have in that chasis

 

provide show version, and show modules for reference. so we can suggest the steps.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hereunder are the supervisors I have and the result of show version:

1 2 1000BaseX (GBIC) Supervisor(active) WS-X4515
2 2 1000BaseX (GBIC) Supervisor(standby) WS-X4515

 

show version
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(18)EW, E ARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 02-AUG-04 02:04 by xptuae
Image text-base: 0x00000000, data-base: 0x010B0624

ROM: 12.1(12r)EW
Dagobah Revision 90, Swamp Revision 28

xptuae-4507R uptime is 4 week, 1 day, 21 hours, 3 minutes
System returned to ROM by RPR Switchover
System restarted at 15:06:22 PARIS-ETE Tue Aug 01 2019
System image file is "bootflash:cat4000-i9s-mz.122-18.EW.bin"

cisco WS-C4507R (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID FOX061000GS
Last reset from Reload
5 Virtual Ethernet/IEEE 802.3 interface(s)
144 FastEthernet/IEEE 802.3 interface(s)
52 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.

For your sup, the latest IOS is this

cat4500-entservicesk9-mz.150-2.SG11.bin

 

You may also want to upgrade the Rommon to this version.

Release 12.2(31r)SGA4 

HTH

Thank you Reza for the reply.

could you please provide the upgrade paths. As I am new to this, I will need the detailed steps to do the upgrade..

 

 

Follow below guide for ROM upgrade and later IOS upgrade.

 

make sure you take backup of currnet config out of the box.

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_24727.html

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Leo Laohoo
Hall of Fame
Hall of Fame
Read the Release Notes of the firmware you want to go to because it has a list of known and fixed bugs.
And as what Reza stated, you'll need a mandatory ROMMON upgrade before an IOS upgrade can be done.

Thank you all for your help. I will try the suggested steps.

Review Cisco Networking for a $25 gift card