08-02-2019 08:31 AM
Dear All,
I am new to switching, I have a Catalyst 4507R switch (cat4000-I9S-M), Version 12.2(18)EW.
I would like to know if there are any bugs related to this version. Could you please tell if it is the case?
I would also like to upgrade the ios to Version 15.0.2. Could you please tell me if it is possible to do this upgrade? or if there is a recommanded upgrade path?
Thanks in advance.
Solved! Go to Solution.
08-02-2019 01:56 PM
For your sup, the latest IOS is this
cat4500-entservicesk9-mz.150-2.SG11.bin
You may also want to upgrade the Rommon to this version.
HTH
08-02-2019 02:14 PM
Follow below guide for ROM upgrade and later IOS upgrade.
make sure you take backup of currnet config out of the box.
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_24727.html
08-02-2019 08:58 AM
What sup do you have?
HTH
08-02-2019 12:53 PM
Hello Reza,
I am sorry to ask, but what do you mean by sup ? thanks in advance.
08-02-2019 01:04 PM
Hi,
Sorry, sup is short for supervisor module.
HTH
08-02-2019 12:56 PM
what is supervisor module you have in that chasis
provide show version, and show modules for reference. so we can suggest the steps.
08-02-2019 01:14 PM - edited 08-02-2019 01:15 PM
Hereunder are the supervisors I have and the result of show version:
1 2 1000BaseX (GBIC) Supervisor(active) WS-X4515
2 2 1000BaseX (GBIC) Supervisor(standby) WS-X4515
show version
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(18)EW, E ARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 02-AUG-04 02:04 by xptuae
Image text-base: 0x00000000, data-base: 0x010B0624
ROM: 12.1(12r)EW
Dagobah Revision 90, Swamp Revision 28
xptuae-4507R uptime is 4 week, 1 day, 21 hours, 3 minutes
System returned to ROM by RPR Switchover
System restarted at 15:06:22 PARIS-ETE Tue Aug 01 2019
System image file is "bootflash:cat4000-i9s-mz.122-18.EW.bin"
cisco WS-C4507R (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID FOX061000GS
Last reset from Reload
5 Virtual Ethernet/IEEE 802.3 interface(s)
144 FastEthernet/IEEE 802.3 interface(s)
52 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
08-02-2019 01:56 PM
For your sup, the latest IOS is this
cat4500-entservicesk9-mz.150-2.SG11.bin
You may also want to upgrade the Rommon to this version.
HTH
08-02-2019 02:01 PM
Thank you Reza for the reply.
could you please provide the upgrade paths. As I am new to this, I will need the detailed steps to do the upgrade..
08-02-2019 02:14 PM
Follow below guide for ROM upgrade and later IOS upgrade.
make sure you take backup of currnet config out of the box.
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_24727.html
08-02-2019 06:21 PM
08-04-2019 06:25 AM
Thank you all for your help. I will try the suggested steps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: