cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
926
Views
0
Helpful
5
Replies

Upgrading IOS problems1

Jeromy Polachak
Level 1
Level 1

Hello all,

I am not seeing what I am missing and the reason its not loading the IOS.

           

Router#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 19-Jun-03 16:35 by pwade
Image text-base: 0x8000808C, data-base: 0x80A14C38

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router uptime is 41 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.122-17a.bin"

cisco 2611XM (MPC860P) processor (revision 0x301) with 125952K/5120K bytes of memory.
Processor board ID JAE0825M2P7 (592030231)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
49152K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

I have three different IOS versions, one that is 13 K, 27, and 32. (cisco 2611XM (MPC860P) processor (revision 0x301) with 125952K/5120K bytes of memory.) I can use any of these right?

The router is giving me this error when im trying to load it.

Router#copy tftp flash

Address or name of remote host [192.168.1.1]?

Source filename [c2600-ipbasek9-mz.124-17a]?

Destination filename [c2600-ipbasek9-mz.124-17a]?

Accessing tftp://192.168.1.1/c2600-ipbasek9-mz.124-17a...

%Error opening tftp://192.168.1.1/c2600-ipbasek9-mz.124-17a (No such file or directory) Router#copy tftp flash
Address or name of remote host [192.168.1.1]?
Source filename [c2600-ipbasek9-mz.124-17a]?
Destination filename [c2600-ipbasek9-mz.124-17a]?
Accessing tftp://192.168.1.1/c2600-ipbasek9-mz.124-17a...
%Error opening tftp://192.168.1.1/c2600-ipbasek9-mz.124-17a (No such file or directory)

The remote host is my computer IP address right? Address or name of remote host [192.168.1.1]? Which it is.

Then the exact file names that im seeing on my computer (which is correct)

Thank you!

Jeromy       

Jeromy
5 Replies 5

Hello

Looks like you are missing a syntax :

Copy tftp flash:

Res
Paul


Sent from Cisco Technical Support iPad App


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

No thats not it, tried the difference and its not working. One thing i figured out so far was i was missing the .bin at the end of the file name. The ip addres of the remote host is of my router not my computer right that was another error i was making. But now im getting this problem.

Router#copy tftp flash:

Address or name of remote host [192.168.1.1]? 192.168.1.10

Source filename [c2600-ipbasek9-mz.124-17a.bin]?

Destination filename [c2600-ipbasek9-mz.124-17a.bin]?

Accessing tftp://192.168.1.10/c2600-ipbasek9-mz.124-17a.bin...

%Error opening tftp://192.168.1.10/c2600-ipbasek9-mz.124-17a.bin (Timed out)

Router#copy tftp flash:

Address or name of remote host [192.168.1.1]? 192.168.1.10

Source filename [c2600-ipbasek9-mz.124-17a.bin]?

Destination filename [c2600-ipbasek9-mz.124-17a.bin]?

Accessing tftp://192.168.1.10/c2600-ipbasek9-mz.124-17a.bin...

%Error opening tftp://192.168.1.10/c2600-ipbasek9-mz.124-17a.bin (Timed out)

Jeromy

Jeromy

Hello

Okay what are you using for a tftp server?
Sometime they cannot transfer a large file or software FW or AV on your pc is prohibiting the transfer.

If you can setup another switch or router to be a tftp server and try again or disable any software fw and AV on your pc

Res
Paul

Sent from Cisco Technical Support iPad App


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Im using the ciscokits server, so i don't think thats the problem because i did it prior and had no issues.

Jeromy

Jeromy

I am so smart lol I figured it out. It was saying no directory or file, because the file i was trying to load it was in a different folder then my TFTP server was set up.

Jeromy

Jeromy
Review Cisco Networking for a $25 gift card