11-22-2010 04:02 AM - edited 03-06-2019 02:09 PM
Hi all
I need to complete some documentation for disaster recovery purposes, basically restoring a cisco cat 6509 running IOS, ie if the file system is corrupt and wont boot.
Can anyone put the basic steps down on restoring and image, config and setting boot parameters to boot from the sup disk and also pcmcia.
I need this info asap, sorry about the rush
cheers
Carl
11-22-2010 04:13 AM
Hi,
Please refer to the following documentations.
Recovering a Catalyst 6500/6000 Running Cisco IOS System Software from a Corrupted or Missing Boot Loader Image or ROMmon Mode
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml
Password Recovery Procedure for Catalyst 6500/6000 Series Switches Running Cisco IOS System Software
Andras
11-22-2010 08:05 AM
Hi
I have done a basic guide for restoring config for other people in my business, can anyone sanity check this for me to make sure its ok or missing anything? it is for a Cat 6509-e with dual sup 720 sups
or
Directory of disk0:/
1 -rw- 68792548 Sep 22 2010 11:48:00 +01:00 s72033-ipbasek9-mz.122-33.SXI4a.bin
2 -rw- 17353 Sep 22 2010 11:49:36 +01:00 preconfig.txt
3 -rw- 15595 Sep 23 2010 19:49:06 +01:00 final_config.txt
4 -rw- 15696 Sep 24 2010 10:01:10 +01:00 ssh
5 -rw- 29322 Oct 11 2010 16:33:26 +01:00 config111010.txt
6 -rw- 33392 Oct 28 2010 13:56:32 +01:00 config281010
7 -rw- 34007 Nov 3 2010 17:48:26 +01:00 config031110
11-23-2010 01:51 PM
can anyone take a look for me if this is ok?
cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide