I am working on adding some redundancy to a site. It currently is using 2 3550-12G fiber switches for the "middle" tier to connect back the wiring closets and to core routers. The routers are both 3825s and the closets are a mix of different Cisco 2950s and 2960s. I am wanting to run EIGRP between the routers and 3550s which would also help routing back to the other sites. The two 3550s have all of the VLAN definitions for the building, and here I am wanting HSRP mainly to provide default-gateway redundancy for end-user workstations if one should quit.
Would this cause issues with EIGRP since both 3550s have the statement network 192.168.0.0 0.0.255.255? Or is it smart enough to realize which one is active? Each VLAN has an IP so for example 3550-1 VLAN 74 shows 192.168.74.2 and 3550-2 shows 192.168.74.3. HSRP would be 192.168.74.1 between them.
Today I'm going to talk about SD-wan including SD-WAN advanced lab ,, first thing let's take a small brief about the SD_WAN. What is SD-WAN? SD-WAN is Software define wide area network and SD-WAN is key part of the technology o...
Leopold Fisher, Cisco Meraki IoT specialist, will introduce you to new and innovative additions to the Meraki portfolio coming in April 2021.
Meraki Vision Session
MV smart camera range is getting big...
To participate in this event, please use the button to ask your questions
Dynamic Routing Protocols & IPv6
Have any questions on dynamic routing protocols with IPv6?
In this event we will answer all your questions related to dynamic routing pro...
Today I'm going to talk about SD-wan including SD-WAN advanced , first thing let's take a small brief about the SD_WAN.What is SD-WAN? SD-WAN is Software define wide area network and SD-WAN is key part of the technology of software-definednetworking ...
The cat's out of the bag! In October 2020, Cisco announced the Next Generation of Enterprising Routing Platforms: the Catalyst 8000 Edge Platforms Family including the Catalyst 8200, Catalyst 8300, Catalyst 8500, and Catalyst 8000V. The new family of Cats...