12-19-2022 11:34 PM
I have used Cisco 9300L Switch but the interface displayed on the web is Basic mode. I want to show you the advanced mode on the web, how should I handle it?
Solved! Go to Solution.
12-23-2022 09:16 PM
if you run the command "show privilege" it will show you what current privilege level you are logged in with.
C9300#show privilege
Current privilege level is 15
12-20-2022 01:56 AM
what advanced mode you looking for ? can you give example ?
what IOS XE code running ?
12-22-2022 12:30 AM
I am using Cisco C9300L-24T-4X 16.12.4
The current viewport on my device is
I want to watch in advanced mode
12-22-2022 01:11 AM
i never seen this issue before - but can you please provide below information :
1. Check admin priveleges
2. check what License and image you have ( show version, show License).
12-22-2022 02:57 AM
Core-SW-BBG#show version
Cisco IOS XE Software, Version 16.12.04
Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.4, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 09-Jul-20 21:49 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2020 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.12.2r, RELEASE SOFTWARE (P)
Core-SW-BBG uptime is 22 weeks, 2 days, 18 hours, 48 minutes
Uptime for this control processor is 22 weeks, 2 days, 18 hours, 49 minutes
System returned to ROM by Reload Command
System image file is "flash:packages.conf"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-advantage Smart License network-advantage
dna-advantage Subscription Smart License dna-advantage
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage
Smart Licensing Status: UNREGISTERED/EVAL EXPIRED
cisco C9300L-24T-4X (X86) processor with 1343576K/6147K bytes of memory.
Processor board ID FOC2509L7EZ
13 Virtual Ethernet interfaces
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
1638400K bytes of Crash Files at crashinfo:.
11264000K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.
Base Ethernet MAC Address : bc:e7:12:f2:6a:00
Motherboard Assembly Number : 73-19168-04
Motherboard Serial Number : FOC25084KEF
Model Revision Number : F0
Motherboard Revision Number : C0
Model Number : C9300L-24T-4X
System Serial Number : FOC2509L7EZ
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 29 C9300L-24T-4X 16.12.4 CAT9K_IOSXE INSTALL
Configuration register is 0x102
12-22-2022 02:59 AM
what me and sure @balaji.bandi meaning you have not priv. level 15 and hence the gui appear like this.
it remove the config....etc. that appear only for priv.level 15.
check you access priv. level
12-22-2022 05:27 PM
I don't understand the implementations yet
Could you please guide me more specifically?
12-22-2022 08:37 PM
check the user has admin priv or post show run here.
12-23-2022 04:19 AM
Config Switch Cisco 9300 Web GUI Basic - YouTube
check this video, see how add privilege to username to make it can access the gui full.
12-23-2022 07:43 PM
line con 0
access-class TELNET in
password 7 047A2F0B062F6
login
stopbits 1
line vty 0 4
access-class TELNET in
password 7 0227205602082F
login
line vty 5 14
access-class TELNET in
login local
line vty 15
login local
12-24-2022 01:04 AM
friend you access http not vty.
privilege is config with username
this from video I share.
can you please make second review of video.
12-23-2022 09:16 PM
if you run the command "show privilege" it will show you what current privilege level you are logged in with.
C9300#show privilege
Current privilege level is 15
12-29-2022 07:45 PM
I have successfully configured
Core-SW-BBG#show privilege
Current privilege level is 15
Thank you so much
12-30-2022 02:17 AM
show privilege only indicate which privilege but you need username with 15 privilege.
I really confuse here.
anyway
Good luck.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide