03-19-2012 11:03 AM - edited 03-07-2019 05:39 AM
Hi
I am using Jermey's new CBT nuggets for CCNA and was making topology on gns3 all is going well but when I tried to make vlan interfaces its give me this error.
interface vlan 64
ip address 10.1.64.1 255.255.254.0
description "Voice Vlan"
interface vlan 66
ip address 10.1.66.1 255.255.254.0
description "Data Vlan"
interface vlan 68
ip address 10.1.68.1 255.255.254.0
description "Server Vlan"
interface vlan 69
ip address 10.1.69.1 255.255.254.0
description "Public WiFi Vlan"
ip address 10.1.70.1 255.255.254.0
% 10.1.70.0 overlaps with Vlan71 (Error)
interface vlan 70
ip address 10.1.70.1 255.255.254.0
description "Private LAB Vlan"
ip address 10.1.70.1 255.255.254.0
% 10.1.70.0 overlaps with Vlan71 (Error)
How can I resolve this problem. and I jeremey is doing the same on gns3 lab and he didnt get any error but I am getting this error please give me the solution.
thanks in advance .
Regards
Faisal
Solved! Go to Solution.
03-19-2012 12:18 PM
It's overlapping because you already have it configured on vlan 71 . You can only have a range on a single SVI or routed port on the L3 switch. vlan 71 with the mask you have covers .70 and .71 subnets . If you already have vlan 71 configured with the same mask that's why it is complaining as it is overlapping.
03-19-2012 12:39 PM
If you use a /24 mask in your configs then you wouldn't have an issue. The way you have it right now all your definitions cover 2 subnets using /23 mask .
03-19-2012 11:09 AM
What does vlan 71 look like? I don't see it in the config...
03-19-2012 11:48 AM
03-19-2012 12:18 PM
It's overlapping because you already have it configured on vlan 71 . You can only have a range on a single SVI or routed port on the L3 switch. vlan 71 with the mask you have covers .70 and .71 subnets . If you already have vlan 71 configured with the same mask that's why it is complaining as it is overlapping.
03-19-2012 12:33 PM
Hi glen
thanks for your reply.
could you please guide me what mask should I use ad I watching the jeremey videos and I have done the same configuration but he didn't get any error only I got this error .
03-19-2012 12:39 PM
If you use a /24 mask in your configs then you wouldn't have an issue. The way you have it right now all your definitions cover 2 subnets using /23 mask .
03-19-2012 01:18 PM
thanks every one for your help and support
regards
Faisal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide