cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
655
Views
0
Helpful
3
Replies

vlan problem catalyst

Hello I have a message error can anyone help me?

What is that: Local updater ID is 10.X.X.254 on interface Vl1 (lowest numbered VLAN interface found)

(config)#vlan 200           

(config-vlan)#name PRUEBA

(config-vlan)#exit

% Applying VLAN changes may take few minutes.  Please wait...

VLAN 1003 parent VLAN missing

APPLY VLAN changes failed

sh vtp status

VTP Version                     : 3 (capable)

Configuration Revision          : 172

Maximum VLANs supported locally : 1005

Number of existing VLANs        : 54

VTP Operating Mode              : Server

VTP Domain Name                 : XYZ

VTP Pruning Mode                : Enabled (Operationally Enabled)

VTP V2 Mode                     : Enabled

VTP Traps Generation            : Disabled

MD5 digest                      : 0xCB 0xFF 0x6F 0x28 0xA6 0x8D 0x25 0x9E

Configuration last modified by 10.40.100.238 at 11-22-11 16:18:53

Local updater ID is 10.X.X.254 on interface Vl1 (lowest numbered VLAN interface found)

VTP version running             : 2

sh version

Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Sat 23-Oct-10 01:30 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX6, RELEASE SOFTWARE (fc1)

System image file is "sup-bootdisk:s72033-ipservices_wan-mz.122-33.SXI5.bin"

Last reload reason: VSLP HA role change from active to standby

cisco WS-C6509-E (R7000) processor (revision 1.5) with 983008K/65536K bytes of memory.

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

45 Virtual Ethernet interfaces

54 Gigabit Ethernet interfaces

20 Ten Gigabit Ethernet interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

Thanks,

3 Replies 3

Bart Kersten
Level 1
Level 1

Hi,

Vlan 1003 is a default tokenring vlan. And therefore can not be used.

Hope this helped

Sent from Cisco Technical Support iPhone App

Thank Bart for this information but I tried to create vlan 200 do not 1003. any idea?

Best Regards.

Santiago

Bart Kersten
Level 1
Level 1

Oke sorry i misunderstood. You might want to reffer to this, it is similar to your problem.

https://supportforums.cisco.com/thread/2027277

Good luck!

Sent from Cisco Technical Support iPhone App

Review Cisco Networking for a $25 gift card