03-31-2007 12:29 AM - edited 03-05-2019 03:12 PM
It's me again... You guys are helpful and i need your help again. i have multiple vlans (1-8) in my switch catalyst 2950. the trunk port from the 2950 i interfaced in the router 3600(ethernet 0/0) and is used as a gateway to the internet, i would like vlan 2, 4 and 6 to get online. can you give me sample configurations... for 3600 and 7204... Thanks
03-31-2007 01:00 AM
Hi
U can do this by implementing access-lists.
Just configure the access-lists allwoing the subnets u want.
access-list 100 permit tcp (subnet address)(inverse mask) any any eq www.
like so u have to configure it for each subnet.if u have contigiuous subnets then u can define them in one line.
Thanks
Mahmood
03-31-2007 01:37 AM
thanks for answering so quickly,
what if i have different IP addresses in the network. lets say vlan 2 has IP Dslam for the dorms, vlan 4 is for the admin office and vlan 6 is for the sister company of the school that uses ipvpn how can i let all three vlan to connect to the internet?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide